Control a light group

PUT /clip/v2/resource/group_light/group_light_uuid

Control the lights in a group with a single request. Include only the properties you want to change; omitted properties keep their current values.

Choose one color control method per request: segmented color, a single color, or color temperature. If you send more than one, the gateway applies them in that order of priority.

When updates take effect

A successful response means the gateway has accepted the request and updated its cached state. The gateway then sends the commands to the lights.

The gateway periodically reconciles its cached state with the device. If a command is lost, a query may briefly show the requested state before reverting to the actual state. For example, a light at 100% brightness may appear to be at 50% immediately after a request, then return to 100% about 10 seconds later if the command was not delivered.

Example request

{
  "on": true
}

Parameters

Field	Location	Type	Required	Description
on	body	boolean	No	On/off state
brightness	body	integer	No	Brightness
color_cw	body	integer	No	Color temperature, from 2000 to 6500.
color_x	body	integer	No	Color X coordinate
color_y	body	integer	No	Color Y coordinate
color_arr	body	object[]	No	Segmented color
color_arr[].x	body	integer	No	Segment X coordinate
color_arr[].y	body	integer	No	Segment Y coordinate
color_rgb	body	integer	No	Packed RGB value in 0xRRGGBB format; for example, 0x112233.
color_rgb_arr	body	object[]	No	RGB colors for individual segments, expressed as packed integers.

You do not need to send color_mode. The gateway determines the color mode from the color parameters in your request.

Example response

{
  "code": 0,
  "data": {
    "arr": [],
    "obj": {}
  },
  "msg": "success"
}

Responses

Status code	Meaning
200	OK

Response fields

HTTP 200 OK

Field	Type	Required	Description
code	integer	Yes	Status code
msg	string	Yes	Message